Divider block to allow multi-point installation for M250, M500 and MSP500 Pulsarlube lubricators. Please contact Ultra-Flow if installation is required.
Divider Blocks for Pulsarlube
Pulsarlube divider blocks, ranging from 2 to 8 ports. The Pulsarlube M series (M, MS/MSP, and M500) are suitable to use for multi point lubrication using a divider block and remote installation. However, it is still recommended to test the back pressure of the bearing and lube line (including a divider block) using a grease gun connected to a pressure gauge. Ensure the break-off pressure is below the maximum operating pressure of the Pulsarlube M series, 30~60kgf㎠ (425 ~ 860psi). Pre-filling the lube line is vital during the test.
- Number of ports available: 2 – 8
- Material: Aluminium
- Inlet and outlet size: 1/8″
- Suitable for: M250, M500, MSP500
|Number of ports||
2, 3, 4, 5, 6, 7, 8